*牌：RETZ/我們一直致力于流體控制和測控領域的持續創新,，始于2005……

浮動式,，固定式氣動法蘭球閥用于輸送粘性,、易結渣介質管道上的球閥應使用全通徑的,，方便定期的刮蠟吹掃器通過,，驅動方式為氣動雙作用，氣動單作用,、帶手動氣動作用,，氣動調節型，防爆氣動球閥 Floating and fixed pneumatic flange ball valves are used for conveying viscous and easily slagging media. Ball valves on pipelines should be full bore, convenient for regular wax scraping and blowing through. The driving method is pneumatic double acting, pneumatic single acting, with manual pneumatic action, pneumatic adjustment type, explosion-proof pneumatic ball valve

進口氣動法蘭球閥產品詳情 Product details

氣動法蘭球閥的閥座多選用聚四氟乙烯,、對位聚苯等高分子聚合材料,，密封性能好，但材料相對較軟,。由于進口氣動法蘭球閥2.jpg材料較軟，但又要達到一定的密封比壓,，勢必增加啟閉扭矩,，為了盡量改善此種情況，RETZ采用雙斜面彈性密封圈或V形槽彈性密封圈結構設計,，利用管道內壓力推動球體,，幫助密封,。當介質壓力較小時，密封圈與球體接觸面積較小,，故有較大的密封比壓,，確保可靠密封,。介質壓力較大時,，密封圈與球體接觸面積增大。故密封圈能承受較大的介質推力而不會損壞,。對于工作壓力很低的球閥,，考慮到介質壓力不能確保閥座可靠密封，而預緊力長期使用后又會衰減,，故對于低壓,、超低壓或真空工況用球閥，采用彈簧加載的閥座密封結構,，能確保球閥長期可靠的密封 retz*牌 (Floating type, fixed type) The valve seat of pneumatic flange ball valve is mostly made of polymer materials such as polytetrafluoroethylene, counterpoint polystyrene, which has good sealing performance, but the material is relatively soft. Since the material is relatively soft, but also needs to reach a certain sealing specific pressure, it is bound to increase the opening and closing torque. In order to try to improve this situation, RETZ adopts the structural design of double bevel elastic seal ring or V-groove elastic seal ring, and uses the pressure in the pipeline to push the ball to help seal. When the medium pressure is small, the contact area between the seal ring and the ball is small, so there is a large sealing specific pressure to ensure reliable sealing. When the medium pressure is large, the contact area between the seal ring and the ball increases. Therefore, the seal ring can withstand large medium thrust without damage. For the ball valve with very low working pressure, considering that the medium pressure cannot ensure the reliable sealing of the valve seat, and the preload will decay after long-term use, the spring loaded valve seat sealing structure is adopted for the ball valve with low pressure, ultra-low pressure or vacuum conditions to ensure the long-term reliable sealing of the ball valve

進口氣動法蘭球閥特點Characteristic

1,、采用全通徑或縮徑設計，流通阻力小 Full bore or reduced bore design, low flow resistance

2,、采用高平臺結構,，ISO5211連接標準，能使安裝電/氣動執行器更為專業化 High platform structure and ISO5211 進口進口氣動法蘭球閥3.jpgconnection standard are adopted to make the installation of electric/pneumatic actuators more professional

3,、閥桿采用內裝式,，軸肩及聚四氟乙烯（或增強石墨）推力墊結構防止閥桿因管道內壓力 而吹  出，同時聚四氟乙烯（或增強石墨）材料減小閥門的啟閉扭矩,，使操作更為省力 The valve rod is of built-in type. The shaft shoulder and PTFE (or reinforced graphite) thrust pad structure prevent the valve rod from blowing out due to the pressure in the pipeline. At the same time, the PTFE (or reinforced graphite) material reduces the opening and closing torque of the valve, so that the operation is more labor-saving

4,、具有防火防靜電結構，在閥桿與閥體及閥桿與球體之間設置導電彈簧,，避免因靜電打火點燃易燃介質,。確保系統安全 It has a fireproof and anti-static structure. A conductive spring is set between the valve rod and the valve body and between the valve rod and the ball to avoid ignition of flammable media due to static electricity. Ensure system security

5、耐火結構雙重保護,，當萬一發生火災而使密封圈燒損時,，球閥的各個密封部位均能形成金屬對金屬的硬密封結構 The fire-resistant structure has double protection. In case of burning of the sealing ring in case of fire, each sealing part of the ball valve can form a metal to metal hard sealing structure

進口氣動法蘭球閥性能描述 Performance description

執行器參數 Actuator parameters